Monday, November 26, 2012

Qwest LS 818 XRE Cruise


Qwest made its reputation by delivering pontoons that are small in size but large in features, comfort and versatility. But most Qwest models have been powered by smaller outboards or electric motors, so they tend to cruise in the right lane of pontooning. For 2012, Qwest flicks the turn signal and eases into the passing lane with the LS 818 XRE Cruise, a three-tube pontoon with enough zip to go skiing or high-speed tubing without having to power it with an engine that could push a river barge.
Unique Factor
Our test Qwest shows off its style with new, fully radiused front corners that give it a sleek, clean look along with a platinum silver finish and tasteful graphics. With a wide-for-its-length 8-foot beam, interior space is maximized and, unlike other pontoons in the compact niche, the Qwest LS (Luxury Series) provides a more upscale look with 33-ounce Soft Touch X-Panded Back vinyl, which features softer foam underneath that carries a warranty for the lifetime of the boat. To prevent the under-seat storage compartments from becoming biology experiments after wet life jackets are tossed in and allowed to simmer, Qwest leaves the bottom vented to promote airflow and puts a pad at the bottom that lets water through but suspends items above the deck, to keep them dry.
Performance
When you see a Honda 90 outboard on the transom bracket, your performance expectations might be low. But, much like when you decided that jumping onto the Facebook IPO at $38 a share was a good idea, you would be wrong. Armed with the Fusion Triple Tube high-performance package — which gives you three 23-inch tubes that have lifting strakes on both sides of all three tubes, as well as an aluminum underskin to reduce drag — the LS 818 XRE Cruise has tremendous lift out of the hole. That lift allows the relatively small Honda BF 90 — an outboard with some pedigree, being the building block for the sporty Fit automobile — to be the little engine that could. Using BLAST technology, which advances the spark when you jam the throttle quickly for additional punch out of the hole, the boat leaps on plane in just 2.6 seconds and reaches 20 mph in 5.3 seconds. Top speed is a brisk 34.6 mph. Need more? The LS 818 XRE is rated for up to 115 hp, which should net an additional 3 or 4 mph, and would be a good choice if you plan to tow adult skiers.
Handling
A smart standard feature with the Fusion Triple Tube package is the SeaStar hydraulic steering system, rather than the usual cable setup you see on pontoons with less than 150 hp. So when you spin a 180 to pick up a downed skier, you can crank the boat around in a hard turn easily. Because it has lifting strakes on the outside of the tubes, the Qwest corners flat but stays hooked up very well. That extra bit of lift you get from the six lifting strakes helps the 818 ride high in the water for better seaworthiness, something not usually associated with compact pontoons. To further reduce the chance of submarining in large cruiser wakes and windborne waves, large splash caps on the front of the outside tubes offer additional lift. Because the 18-foot, 4-inch center tube is positioned farther back, in order to create the engine bracket, it pushes the LOA to 20 feet and helps it perform like a bigger boat.
Best Uses
There isn’t much the 818 isn’t capable of doing. The stern is well designed for fishing with a pair of angler chairs in each rear corner. The giant all-purpose table makes a great place to rig your equipment, measure fish on the built-in ruler or clean the catch. There’s even a pair of Plano-style tackle boxes built into the sunpad bulkhead just in front of the fishing station. The livewell is around the corner underneath the cockpit’s L-lounge, which may not seem ideal, but it will give you time to reconnect with those on board who only want to see their fish on a plate at a restaurant. Twin recliner couches forward of the fishing station allow passengers to lie back and catch the sights or catch up on their trashy summer novels.
If the fish aren’t biting and the kids are champing at the bit for some action, the LS 818 shifts seamlessly into skiing mode. Our test boat is optioned with a tall, well-anchored ski tow bar that keeps the tow line above the Honda. The boat is light, with a dry weight of 1,750 pounds, but the weight is spread over three tubes, creating a flattish wake that is ideal for slaloming. You can beef up the wake a bit for junior wakeboarding by shifting passenger weight aft and trimming up at 20 mph, but the kids will have to learn to explode off the mini wake, which is not necessarily a bad thing while learning. If riding on a tube is your kids’ cup of Sunny D, the LS 818 is a perfect candidate for towing. If you remove the twin fishing seats, you create enough space in the stern area to stow your Macy’s parade-like inflatable vertically, keeping it out of the cockpit.
Preferred Setup
The Qwest LS 818 XRE Cruise comes fully loaded with upscale features such as the JBL MP3 stereo with an iPod docking station and upgraded Infinity speakers, which gets the party vibe rolling. This rig is so easy to tow and launch you’ll definitely want the Float-On trailer option for taking your Qwest on the road. The LS 818 has a small 12-gallon external fuel tank, which is convenient for reloading at local gas stations but limits your range if cruising is your thing. There’s room for an optional 18-gallon external tank, which would be a good upgrade, but a larger internal tank in the center tube would be ideal. Adding the ski tow bar is a must for engaging in watersports and helps make the 818 the ultimate in compact pontoon versatility.
Related products recommended:



Saturday, January 14, 2012

ztfittings


About

Wenzhou Zhongtian Stainless Steel Pipe Fitting Co., Ltd, we introduce ourselves as leading manufcturer and exporter of stainless steel sanitary fittings , valves and Plunger Pump.
Our main products include tee,elbow,cross,reducer , butterfly valves,check valves, sampling valves, ferrule ,adapter, unions, sight glass,Positive Displacement Pump and other vacuum components.
Our products have been exported to America, Germany, Australia, Japan, Europe, the Middle East and other countries. With high content of technology and reliable quality, our products have gained high fames from customers.
We integrate design, development and manufacturing together. Besides, our company has a group of professional administrators and technology talents. We adopt world leading processing equipment and technology, choosing high quality stainless steel raw materials. All productions are carried out in according to different fineness, material quality and industry standards, as 3A, ISO, DIN, SMS, and so .
Our products are widely used in the fields of petroleum, chemical industry, power metallurgy, space flight aviation, beverage, environmental protection and other dairy/food industries.
We keep moving to improve product quality and develop the newest design in order to satisfy customers' requirements. Our mission is "to create value and dedicate to the society."
We welcome both domestic and overseas customers to negotiate business and establish long-term friendly relationship with us.

Contact

Company Name: Wenzhou Zhongtian Stainless Steel Pipe Fitting Co., Ltd. 
Street Address:  Liuzai Village,Yongzhong Street, Longwan 
City:  Wenzhou 
Province/State:  Zhejiang 
Country/Region:  China (Mainland) 
Zip: 325025 
Telephone: 86-577-86925757 
Mobile Phone:  13736736079 
Fax:  86-577-86924555 
Website: http://www.ztfittings.cn

supermarketracks


About

Adarsh Udyog, Pioneer in storage System with the creation of working solutions for the storage needs for all the section of industries from heavy Indusry to Display Stand.
Adarsh more than ten years of its quality reputation & Dependabiliy is built on high performance products through its innovation.
The Work Force
Our manufacturing activity is backed with a highly talented, Strong, Efficient team to meet technical Complexity of work at any volume of production activity. We at Adarsh provide a excellent & friendly environment with more focus on Team Building.
Manufacturing Capability
Adarsh, has a full fledge manufacturing in house facility. Our factory has a complete manufacturing capabilities which includes Shearing Machines, Power presses, Press Brake, Welding machines, Paint Booth & 100% Power Back through Generators.
Raw Material
Our Raw Material is being purchase from reputed manufacturers only.
This Raw Material includes Steel, Chemicals, Paint etc. For Example. We Purchase Steel only of Steel authority of India, Tata, Essar Steel, Espat.
Cleaning & Painting Process
We undertake cleaning process and remove all the grease and oil which may be on steel before painting. This is important, as without Chemical treatment there will no good adherence of the paint to the Steel Surface. |
The Chemical Process includes Decreasing and Phosphating process.
The material is then painted to ensure a good life and proper finish of Display Rack.
Financial Status
Our Sound financial base and good reputation enable us to hold adequate stock of steel & other vital components which helps us to provide interrupted supply to our clients timely.

Contact
Works
Unit I. Plot No. 2. Nangli Sakrawati Indl. Area, New Delhi - 110043
Ph. : +91 011 25321632, 25324797.
Fax. : +91 011 25322091
Mob. : 0 9810098860 / 9313098860
Unit II. S-1, Phase 1, Badli Industrial Estate, New Delhi
Ph. : +91 011 27296472
Email : sales@supermarketracks.com
Web:http://www.supermarketracks.com/

thetinbox


About

The Tin Box provides an opporunity for you to have a photographic image of these old ads from days gone by.
They make great gifts for birthdays, Christmas and just about any reason you can come up with.
These prints are done with FILM and KODAK paper. (The old fashioned way)
Browse around and look at the cool old ads. You might find something you want
In 1927, rural America was without electricity. Rural homes were being lighted using oil or Kerosene lamps. The radio, powered by storage batteries was the only electrical convenience available to most people who did not live in town. The radio was the only window to the world for the people, but the batteries kept going dead. It was a real inconvenience to get the batteries recharged.
In Cherokee, Iowa, two brothers, John and Gerhard Albers, developed a wind generator to recharge a six-volt storage battery. They called their invention “The Wincharger.” It worked so well that friends and neighbors were soon asking the Albers brothers to build Winchargers for them. Their business grew and in 1935, Wincharger was incorporated as a business and manufacturing of tin can was moved to Sioux City, Iowa.
Zenith Corporation purchased a controlling interest in Wincharger in late 1935. The six-volt Wincharger sold for $10 to purchasers of Zenith radios who wanted the power unit.
In 1937, Zenith Radio Corporation purchased the remaining shares of Wincharger stock. To provide additional lighting capacity, 12-volt, 32-volt, and 110-volt generators were developed. Soon the company was known all over the world for the unfailing dependability of the Wincharger.

Contact

You can call me if you wish at 830-885-4991
Or you can send a letter to me in Spring Branch, TEXAS!
( NOT in Houston )
George Ramsower
1067 Hackamore Pass
Spring Branch, TEXAS! 78070
Web:http://www.thetinbox.com/

hebei-wiremesh


Anping Yuandong Metal Product Co.,Ltd is engaged in manufacture and export of Sintered Wire Mesh products. This factory is located in Anping County of Hebei Province, which is well known in China for wire mesh manufacture and export. We mainly produce wire mesh series products and Our main products are "Ming Zuan" brand series wire netting against mosquito, Laminated Mesh, hexagonal wire netting, woven wire cloth, metal forging, stainless mesh, brass wire mesh, galvanized iron wire, black annealed wire, loop tie wire and other wire related products.
Since the year 1989, wire mesh products produced by us have been exporting to the U.S.A., Japan, Turkey, Saudi Arab and many other countries and regions. Our brand: Ming Zuan, it means Famous Diamond to the effect. We choose this brand as it can express our aim and our value, we always aim at providing perfect products and services.

Contact
Add: No.87 WangDu East Street Anping County, Hengshui City, Hebei , China 
E-mail: 
manager@hebei-wiremesh.com 
TEL:+86-318-7523007 
+86-318-7535050
+86-318-7532222 
FAX:+86-318-7524867
Web:http://www.hebei-wiremesh.com/

Friday, January 13, 2012

fzwiremesh


About

Hebei Fangzheng Metal Net Co. Ltd was built in 1984. In 1995, the company made a joint venture with TaiWan specialized in producing and exporting various Resistance Wire and Heating Elements products
Our main products include stainless steel wire mesh, brass wire cloth, galvanized square wire mesh, hexagonal wire mesh, welded wire mesh and welded panels, window screen, chain link fence, Safety Grating, expanded netting, wire mesh fences, galvanized wire and other wire mesh products.
Our wire mesh products are made according to International standard. The Quality Management System of Hebei Fangzheng Wire Mesh Co., Ltd has been approved by ISOQAR to ISO9001: 2000 with its manufacture and sales of wire mesh products.
Our company has established steady business relationship with the customers in the regions of North America, Europe, Middle East and Southeast Asia. We would like to provide good quality products and reliable service for you.
ADD:The Development Circumscription in the East of Anping, Hebei Province, P. R. China

Contact

Postcode: 053600
TEL:+86-318-7536864
FAX:+86-318-7523344
E-mail:sales@fzwiremesh.com
sales@wiremesh-fz.com
fangzheng@fzwiremesh.com

Web:
http://www.fzwiremesh.com/

aluminumfastener


Dear Customer,
Aluminum Fastener Supply Co. was brought into existence to fill a void in the non-ferrous fastener market.
We strongly believed that there was a need for one company to carry in stock a full line of heavy hex nut and heavy hex bolt from A to Z, along with a knowledgeable staff who knew alloys, finishes and their applications. Our sales staff both inside and out are committed on a daily basis to helping you, the customer, with your aluminum needs and at the same time, learning and keeping pace with the new advances this metal is making in the market place.
To those who we have sold before, thank you, and to those we haven’t, we are looking forward to selling you in the future.
Lori Coar, President
Aluminum Fastener Supply Co., Inc.

Web:http://www.aluminumfastener.com/